The Tube Guide consist of a steel or aluminium or plastic tapered head and an replaceable nylon brush, and it’s used to guide tubes through the sheets and the tube support plates during tube bundles assembling. The nylon brush fits in the tube end, holding pilot firmly in place.
Ideal for sealing leaky tubes in condenser and heat exchangers. It is recommended to use our ortc one revolution tube cutter to puncture the tube to ensure that pressure can not build up in the tube and cause the plug loosen or blow out.
The vacuum leak tester KVLD-3000 is a simple, precise method of testing tubes in boilers, condensers, an d heat exchangers. It is the fastest, most accurate means of locating leaky tubes for plugging or replacement.
Powered by compressed air the vacuum leak detector pulls a vacuum in a tube to a desired reading on a gauge. A steady reading on the gauge would indicate that the tube doesn’t leak. If the reading on the gauge drops you have pinpointed the leaking tube.
Our Tube Hole Gages utilize a precision three point contact, self centering system, for measuring both Tube and Tube sheet ID. Our Reversible Dial Plate, allows the user to measure in both inch/decimal and metric units. Our standard adjustable depth is 4” ( 101mm) or 8” ( 203mm) dependent on model. We offer additional 8” ( 203mm) reach extensions to increase the capacity of these tools for Fin Fan and similar units.
All gages are furnished with both setting ring and carrying case.
We use newest technology not only in our production. We like hitech in everyday life. So You can call us at skype!
You can add us to your contact list now! Our SkypeLogin is: kraisj.
Accessories :: Right Angle Gear Drive
