Online PDF file, may take few minutes to view first page! Catalog will be open in new window!
Poczekaj moment na otwarcie sie pierwszej strony. Katalog otworzy sie w nowym oknie.
Katalog aufbringen neu fensterplatz.
Compressed file, may take few minutes to download completly to Your computer!
Pobierz spakowany katalog.
Krais Calatog ZIP
Tuba Removal Tools :: ORTC One Revolution Tube Cutter
INFO:
These tools have been designed for cutting both ferrous and non-ferrous tubes, that are commonly found, in heat exchangers, boilers and condensers. Our standard tool is adjustable from 1”-6” (25 mm-155 mm). Longer reach tools are available in 10” (254 mm) increments. The tool is designed to be used with a hand or ratchet wrench only. Impact wrenches should never be used with these tools. The Cutting of the tube is based on the eccentric principle, where the cutter bit moves out to the tube wall as the cutter is rotated. Continued clockwise rotation wil puncture and cut the tube in one revolution. Simply rotating the tool counterclockwise closes the bit and the tool can be removed from the tube.
Our new PTTC tube cutters (now available form 1/2” up to 4” O.D.) offer new features to make it the most versatile cutter available. The cutter blade depth can be adjusted to allow the tube to be cut through. The cutter blades are made out of the HSS what assure long life time (when used with proper cutting speed) A single blade is used in cutters from PTTC-82 to PTTC-254.
The PTTC-254 is also available with 2 blades. The cutter from PTTC-315 up to PTTC-902 are furnished with two blades. The front pilot mounted under the cutter keeps the cutter in the center of the tube and prevent the cutter to be jammed as the chips must go forward into the tube. Also available as tube trimmer.
This Cutter has the same features as the PTTC cutter but has the Automatic Feeding Attachment which make the cutting process very easy, and by the constant pressure on the cutter bits extend the lifetime of the blades. Now available from 1-1/4” up to 4” O.D.
TD Tube Drifts and CT Collapsing tools, very good tools for quick removal of tube stubs from the tube sheet. For tube 1/2” to 1” O.D. tools are made as standard. Other sizes availbale on request. The tools are equipped with shank 06. The 01 shank and tool with reach longer the 6” available on request. Other sizes, up to 2” available on request.
TD Tube Drifts and CT Collapsing tools, very good tools for quick removal of tube stubs from the tube sheet. For tube 1/2” to 1” O.D. tools are made as standard. Other sizes availbale on request. The tools are equipped with shank 06. The 01 shank and tool with reach longer the 6” available on request. Other sizes, up to 2” available on request.
It is a special reamer made out of high speed steel, it has a Morse Taper shank and a centralizing pilot specially grinded according to the tube gauge. This tools are used to reduce the gauge of tube to be removed from the tube sheet. Tubes should be drilled in about 80% of the length of the tube sheet. After the drilling, tube can be removed be the tube drift.
Introducing our NEW Lever Type Tube Cutters! These tools have been designed to cut both ferrous and nonferrous tubes quickly and effortlessly. The high torque motors combined with our lever assist unit, allow a constant feed rate of the cutting bit. This results in higher productivity and extends the life of the cutter.
We offer two types of tool. You can select the PLTC-50 Pneumatic Tube Cutter in either 1250, 600 , 400, AND 200 ~150 rpm options (see chart for recommended material cutting speeds) or the ELTC-550 Iin either 1200 or 550 rpm.
We use newest technology not only in our production. We like hitech in everyday life. So You can call us at skype!
You can add us to your contact list now! Our SkypeLogin is: kraisj.
Tuba Removal Tools :: ORTC One Revolution Tube Cutter
