PanelMill PF – Holders

The first and only outside locking beveling machine with positive feed

Outside beveling holders

Cutting edge length: 12 mm, standard angle: 37,5° (others on request)

OUTSIDE BEVELING HOLDERS

Holders

HOLDER NO.	BIT	HEAD	RANGE MM		RANGE INCH		DEGREE *
			MIN	MAX	MIN	MAX
OB-18-37-P	CDI	64	0,00	47,00	0,00	1,850	30; 37,5
		OB-18-37-P	CDI	99	0,00	85,00	0,00	3,346/td>	30; 37,5
				OB-18-37-N	CDI	64	11,00	56,50	0,433	2,224	30; 37,5
						OB-18-37-N	CDI	99	11,00	95,00	0,433	3,740	30; 37,5
								OB-18-37-L	CDI	64	20,00	65,50	0,787	2,579	30; 37,5
										OB-18-37-L	CDI	99	20,00/td>	104,00	0,787	4,094	30; 37,5

Outside beveling holders

Cutting edge length: 10 mm, standard angle: 37,5° (others on request)

OUTSIDE BEVELING HOLDERS

Holders

HOLDER NO.	BIT	HEAD	RANGE MM		RANGE INCH		DEGREE *
HOLDER NO.	BIT	HEAD	MIN	MAX	MIN	MAX	DEGREE *
WR-PM-R18-37-S	WRIL	64	22,00	66,00	0,866	2,598	30; 37,5
WR-PM-R18-37-N	WRIL	64	36,00	80,00	1,417	3,150	30; 37,5
WR-PM-R18-37-N	WRIL	99	36,00	116,00	1,417	4,567	30; 37,5

Inside beveling holders

Cutting edge length: 12 mm, standard angle: 37,5° (others on request)

INSIDE BEVELING HOLDERS

Holders

HOLDER NO.	BIT	HEAD	RANGE MM		RANGE INCH		DEGREE *
HOLDER NO.	BIT	HEAD	MIN	MAX	MIN	MAX	DEGREE *
IB-PM-18-37-P	WRIL	64	10,00	56,00	0,394	2,205	30; 37,5
IB-PM-18-37-P	WRIL	99	10,00	95,00	0,394	3,740	30; 37,5
IB-PM-18-37-N	WRIL	64	20,00	65,00	0,787	2,559	30; 37,5
IB-PM-18-37-N	WRIL	99	20,00	104,00	0,787	4,094	30; 37,5
IB-PM-18-37-L	WRIL	64	35,00	79,00	1,378	3,110	30; 37,5
IB-PM-18-37-L	WRIL	99	35,00	115,00	1,378	4,528	30; 37,5

Facing Holders

Cutting edge length: 15 mm, standard angle: 90,0°

FACING HOLDERS

Holders

HOLDER NO.	BIT	HEAD	RANGE MM		RANGE INCH		DEGREE *
HOLDER NO.	BIT	HEAD	MIN	MAX	MIN	MAX	DEGREE *
F-PM-18-90-P	WRIL	64	0,00	53,00	0,000	2,087	90
F-PM-18-90-P	WRIL	99	0,00	88,00	0,000	3,465	90
F-PM-18-90-L	WRIL	64	20,00	80,00	0,787	3,150	90
F-PM-18-90-L	WRIL	99	20,00	116,00	0,787	4,567	90