Tube SpinAIR

1 Step 1

Product

Your full name

Country

Email for sending offer

Give us details to prepare a quotation. Tube and/or tube sheet parameters, required range, torque, a model of tool. More details - the better!

Tube ID, OD and tube GA; tool number, motor torque; etc.

Additional message (eg. questions, quantities, for what company or specific needs)your full name

Key Features

Pneumatic tube spinners is designed to remove and flatten non ferrous tubes from 5/8” to 1 1⁄4” OD. Can also be used to extract ferrous tubes from 5/8” to 1 1⁄2” OD using special shaped rolls sized to fit each tube.

Parameters

Model	PULLING SPEED	TORQUE		PULLING FORCE	AIR CONSUMPTION		AIR PRESSURE		MAX MOTOR POWER
TUBE SPINAIR-12	12 m/min	1183 Nm	872,25 Ft.Lbs	2,50 Ton	2 x 2300 l/min	2 × 75 cfm	6,2 bar	90 psi	2 × 3,0 Hp
TUBE SPINAIR-20	20 m/min	886 Nm	653,48 Ft.Lbs	1,80 Ton	2 x 2300 l/min	2 × 75 cfm	6,2 bar	90 psi	2 × 3,0 Hp
TUBE SPINAIR-40	40 m/min	960 Nm	708,06 Ft.Lbs	1,95 Ton	2 x 2800 l/min	2 × 95 cfm	6,2 bar	90 psi	2 × 3,5 Hp

Tube SpinAIR

Key Features

Parameters

Tool in action

Navigate Quickly

View Our LineUp